Product Code: KK-PS-24XW-50-LFSZ Wattage: 50 Input Current: 0.7A Input Voltage: 100-277 Model/DLC Number: KK-PS-24DW-40-LFSZ
Certifications: DLC 4.2, UL Lumens: 5250 - 4K
5500 - 5K
Efficacy: 100LM/W Rated Life: 50,000 hours Kelvin Temperature (CCT): 4000k
CRI: 80 Dimmable: 0-10V Lens Color: Frosted Beam Spread: Mounting Options: Lay-in, suspension Warranty: 5 years Power Factor: 0.9 Frequency: 50/60Hz THD: 20% Length (in/mm): 48/1219.2 Width (in/mm): 24/609.6 Height (in/mm): 2/50.8 Weight: 14Lbs Operating Temperature: -4 - 104 Materials: Aluminum/Plastic Chip Manufacturer: SMD4014 Wattage Saved: 50% UPC Code: Master Carton: 4pcs
|ENERGY USED IN WATTS||5,500
2x4 LED panel light with flicker free driver ideal for drop ceilings and easy to surface or suspension mount with optional kits (sold seperately). This series of LED drop ceiling light panels is our most common replacement for 2x4 drop ceiling grids where conventional fluorescent troffers are commonly used. These panels are 0-10V dimming compatible and accept input voltages from 120-277V. Flicker free driver eliminates flickering often found with traditional LED drivers and fluorescent ballasts which can be picked up in photography and video and may also affect those with light sensitivity.
The low cost of these panel lights combined with their low energy consumption and DLC Premium certification offer you a fast return on investment. In many area lighting rebates are available to help greatly offset the initial cost of purchase.
Please note: Minimum quantity for shipping is 2 pieces.
Application and spacing:
Use these flat panels to replace fluorescent troffer lights with 3 or 4 lamps (F32T8 or F34T12). Typical spacing is approximately 4 feet apart in any direction.
Dimming may be accomplished with a 0-10V dimmer (sold seperately) and dimmer capacity will vary by manufacturer. Typically you can expect to put as many as 25 panels on a single dimmer. Dimmer wiring is usually done in series with a single run going back to the dimmer itself. As with any low voltage system the length of your run from the switch may need to be taken into consideration. If you exceed 100ft in wire then you may experience inconsistent light levels across the run. Voltage drop can usually be avoided on larger installations by using a dimmer with a compatible power pack to maintain consistent voltage across the run. For additional information on dimming please consult the manufacturer of your prospective dimming devices.
- Lutron: DIVA-DVSTV, DIVA-DVTV
Latest LED lighting technology offers the highest return on initial investment
Saving more than 75% energy compared with traditional grid fixtures
Perfect Light Uniformity
Up to 100 lumen per watt efficacy
0-10V dimmable Flicker Free driver
DLC 4.2 standard
5 Year Manufacturers Warranty