5,200 lumens - 2x4 LED flat panel light - 40W High Efficiency 130lm/w 100-277V 4000k or 5000k colors - 0-10V dimming - Standard Flicker Free Driver - UL and DLC Listed

You save $6.60
Minimum Purchase:
2 units
Calculated at Checkout
$199 Free Shipping


DOWNLOADS Download PDF file
Product Code: KK-PS-24XW-40-LFPZ
Wattage: 72
Input Current: 0.7A
Input Voltage: 100-277
Model/DLC Number:



Certifications: DLC 4.2, UL
Lumens: 5200
Efficacy: 130LM/W
Rated Life: 50,000 hours
Kelvin Temperature (CCT):



CRI: 80
Dimmable: 0-10V
Lens Color: Frosted
Beam Spread:  
Mounting Options: Lay-in, suspension
Warranty: 5 years
Power Factor: 0.9
Frequency: 50/60Hz
THD: 20%
Length (in/mm): 48/1219.2
Width (in/mm): 24/609.6
Height (in/mm): 2/50.8
Weight: 14Lbs
Operating Temperature: -4 - 104
Materials: Aluminum/Plastic
Chip Manufacturer: SMD4014
Wattage Saved: 50%
UPC Code:  
Master Carton: 4pcs
40W 3-4xF32T8
5 yr

High Efficiency Flicker Free 2x4 LED panel light ideal for drop ceilings and easy to surface or suspension mount with optional kits (sold separately). This series of LED drop ceiling light panels is our most common replacement for 2x4 drop ceiling grids where conventional fluorescent troffers are commonly used. These panels are 0-10V dimming compatible and accept input voltages from 120-277V.  Flicker free driver eliminates flickering often found with traditional LED drivers and fluorescent ballasts which can be picked up in photography and video and may also affect those with light sensitivity.  

The low cost of these panel lights combined with their low energy consumption and DLC Premium certification offer you a fast return on investment. In many area lighting rebates are available to help greatly offset the initial cost of purchase.

Slim design 2x4 LED flat panel lights provide smooth and uniform light , simple and modern look. An excellent lighting solution for commercial office spaces, school, healthcare and retail merchandising areas.  Choice of 4000k cool white or 5000k bright white color temperatures.

Please note: Minimum quantity for shipping is 2 pieces.

Application and spacing:

Use these flat panels to replace fluorescent troffer lights with 3 or 4 lamps (F32T8 or F34T12).  Typical spacing is approximately 4-6 feet apart in any direction.


Dimming may be accomplished with a 0-10V dimmer (sold separately) and dimmer capacity will vary by manufacturer.  Typically you can expect to put as many as 25 panels on a single dimmer.  Dimmer wiring is usually done in series with a single run going back to the dimmer itself.  As with any low voltage system the length of your run from the switch may need to be taken into consideration.  If you exceed 100ft in wire then you may experience inconsistent light levels across the run.  Voltage drop can usually be avoided on larger installations by using a dimmer with a compatible power pack to maintain consistent voltage across the run.  For additional information on dimming please consult the manufacturer of your prospective dimming devices.

Recommended dimmers:


  • High Efficiency Output Gets More Light Using Less Energy
  • Latest LED lighting technology offers the highest return on initial investment

  • Saving more than 75% energy compared with traditional grid fixtures

  • Perfect Light Uniformity

  • Up to 130 lumens per watt efficacy (+/-5%)

  • 0-10V dimmable Flicker Free driver

  • DLC 4.3

Warranty Information

5 Year Manufacturers Warranty