LED

4,500 lumens - 2x2 LED lay-in panel light - 40W - 4000k or 5000k - dimmable - UL and DLC Listed

$199.96 $151.96
You save: $48.00

Availability:
Usually ships in 1 business day
SKU:
LOD-22PL-40W50K-BS-4PACK
Color Temperature *
Surface Mount Kit *
Current stock: 0
 
Description
DOWNLOADS
SPECIFICATIONS
Product Code: LOD-22PL-50WBS
Wattage: 40
Input Voltage: 120-277
Model/DLC Number: LOD-22PL-40W40K-BS
LOD-22PL-40W50K-BS
Certifications: DLC, UL
Lumens: 4500
Efficacy: 112LM/W
Rated Life: 50,000 hours
Kelvin Temperature (CCT): 4000k
5000k
CRI: 82
Dimmable: 0-10V
Lens Color: Frosted
Beam Spread: 120
Mounting Options: Lay-in, suspension, sirface
Warranty: 5 years
Power Factor: 0.91
Frequency: 50/60Hz
Length (in/mm): 24/609.6
Width (in/mm): 24/609.6
Height (in/mm): 2/50.8
Weight: 7Lbs
Operating Temperature: -4 - 104
Materials: Aluminum/Plastic
Chip Manufacturer: SMD2835
UPC Code: 815586023714
Master Carton: 2pcs
CERTIFICATIONS
40W 2xFB32T8
REPLACEMENT
5 yr
WARRANTY
ENERGY USED IN WATTS 4,500 
LUMENS
DLC
LISTED

2X2 PANEL 4 PACK

2x2 LED panel light ideal for drop ceilings and easy to surface or suspension mount with optional kits (sold seperately). This series of drop ceiling lights is our most common replacement for 2x2 drop ceiling grids where conventional fluorescent troffers are commonly used. Our panels are 0-10V dimming compatible and accept input voltages from 120-277V.  

The low cost of these panel lights combined with their low energy consumption and DLC Premium certification offer you a fast return on investment. In many area lighting rebates are available to help greatly offset the initial cost of purchase.

Please note: Minimum quantity for shipping is 4 pieces.

Application and spacing:

Use 2X2 flat panels to replace fluorescent troffer lights with 2 lamps (FB32T8, FB34T12, or FT40DL).  Typical spacing is approximately 4 feet apart in either direction.

Dimming:

Dimming may be accomplished with a 0-10V dimmer (sold seperately) and dimmer capacity will vary by manufacturer.  Typically you can expect to put as many as 25 panels on a single dimmer.  Dimmer wiring is usually done in series with a single run going back to the dimmer itself.  As with any low voltage system the length of your run from the switch may need to be taken into consideration.  If you exceed 100ft in wire then you may experience inconsistent light levels across the run.  Voltage drop can usually be avoided on larger installations by using a dimmer with a compatible power pack to maintain consistent voltage across the run.  For additional information on dimming please consult the manufacturer of your prospective dimming devices.

Recommended dimmers:

Features:

  • Designed to fit any ceiling surface
  • Built for easy installation in drop ceilings (aka t-bar) ceilings with 2 inches or more installation depth
  • Lay-in and suspension mounting options
  • Environmentally friendly and recyclable
  • Low maintenance and long life
Reviews
More Info

More Info

Warranty:
5 Year Manufacturers Warranty
SKU:
LOD-22PL-40W50K-BS-4PACK
Condition:
New
Availability:
Usually ships in 1 business day
Shipping:
Calculated in cart
Mounting:
Drop ceiling - no additional parts needed
Mounting:
Surface mount - with optional kits sold separately
Applications:
Office
Applications:
Retail
Applications:
Kitchen
Ceiling Height:
8-12 feet
Ceiling Height:
12-16 feet
Wattage:
40w
Input Voltage:
120-277V
Certifications:
DLC Premium
Certifications:
UL Listed
Dimming:
0-10V Dimming
Compatible Accessories:
0-10V Dimmer
Compatible Accessories:
Occupancy Sensor
Equal To:
2xFB32T8
Equal To:
2xFB34T12
Equal To:
2xFB40T12
Equal To:
2xFT40DL