High output UL and DLC Listed 2x4 LED Flat Panel Light with 5000k bright white colored light output. This ultra thin panel requires only 2 inches of clearance and installs in minutes in drop ceilings or mount to hard surface using the optional surface mount kit. Perfect for offices, retail spaces, gyms, cafeteria lighting, and many more.
Please note: Minimum quantity for shipping is 2 pieces.
Application and spacing:
Use these flat panels to replace fluorescent troffer lights with 3 or 4 lamps (F32T8 or F34T12). Typical spacing is approximately 4-6 feet apart in any direction. If you're installing in a drop ceiling the easiest way to calculate quantity is space them every other tile length wise (long side) and every 2-3 tiles on the narrow side.
Dimming may be accomplished with a 0-10V dimmer (sold separately) and dimmer capacity will vary by manufacturer. Typically you can expect to put as many as 25 panels on a single dimmer. Dimmer wiring is usually done in series with a single run going back to the dimmer itself. As with any low voltage system the length of your run from the switch may need to be taken into consideration. If you exceed 100ft in wire then you may experience inconsistent light levels across the run. Voltage drop can usually be avoided on larger installations by using a dimmer with a compatible power pack to maintain consistent voltage across the run. For additional information on dimming please consult the manufacturer of your prospective dimming devices.
- Lutron: DIVA-DVSTV, DIVA-DVTV
|Certifications:||UL, DLC 4.3|
|Rated Life:||50,000 hours|
|Kelvin Temperature (CCT):||5000k|
|Mounting Options:||Lay-in, suspension|
|Operating Temperature:||-4 - 104|
|ENERGY USED IN WATTS||
Latest LED lighting technology offers the highest return on initial investment
Saving more than 75% energy compared with traditional grid fixtures
Perfect Light Uniformity
Up to 105 lumens per watt efficacy (+/-5%)
5 Year Manufacturers Warranty