2x2 LED Panel Light 40W 120-277V 4000 lumens 4000k or 5000k 0-10V dimming compatible UL and DLC

SKU:
KK-PS-22xW-40-LFSZ
Sale
$38.49
$38.49
$37.28
You save $1.21
Condition:
New
Shipping:
Calculated at Checkout
$199 Free Shipping

Description

DOWNLOADS Download PDF file
SPECIFICATIONS
Product Code: KK-PS-22xW-40-LFSZ
Wattage: 40
Input Voltage: 120-277
Model/DLC Number:

KK-PS-22DW-40-LFSZ

KK-PS-22EW-40-LFSZ

Certifications: DLC, UL
Lumens: 4000
Efficacy: 100LM/W
Rated Life: 50,000 hours
Kelvin Temperature (CCT): 4000k
5000k
CRI: 82
Dimmable: 0-10V
Lens Color: Frosted
Beam Spread: 120
Mounting Options: Lay-in, suspension, surface
Warranty: 5 years
Power Factor: 0.91
Frequency: 50/60Hz
Length (in/mm): 24/609.6
Width (in/mm): 24/609.6
Height (in/mm): 2/50.8
Weight: 7Lbs
Operating Temperature: -4 - 104
Materials: Aluminum/Plastic
Chip Manufacturer: SMD2835
UPC Code:  
Master Carton: 4pcs
CERTIFICATIONS
40W 2xFB32T8
REPLACEMENT
5 yr
WARRANTY
ENERGY USED IN WATTS 4,000 
LUMENS
DLC
LISTED

2X2 PANEL LIGHT

2x2 LED panel light ideal for drop ceilings also known as grid or t-bar ceilings. This series of drop ceiling lights is our most common replacement for 2x2 drop ceiling grids where conventional fluorescent troffers are often used. These panels are 0-10V dimming compatible and accept input voltages from 120-277V.  

The low cost of these panel lights combined with their low energy consumption and DLC Premium certification offer you a fast return on investment. In many area lighting rebates are available to help greatly offset the initial cost of purchase.

Color Temperatures Denoted In Part Number As Follows: 4000k = DW  |  5000k = EW

Application and spacing:

Use 2X2 flat panels to replace fluorescent troffer lights with 2 lamps (FB32T8, FB34T12, or FT40DL).  Typical spacing is approximately 4 feet apart in either direction.

Dimming:

Dimming may be accomplished with a 0-10V dimmer (sold separately) and dimmer capacity will vary by manufacturer.  Typically you can expect to put as many as 25 panels on a single dimmer.  Dimmer wiring is usually done in series with a single run going back to the dimmer itself.  As with any low voltage system the length of your run from the switch may need to be taken into consideration.  If you exceed 100ft in wire then you may experience inconsistent light levels across the run.  Voltage drop can usually be avoided on larger installations by using a dimmer with a compatible power pack to maintain consistent voltage across the run.  For additional information on dimming please consult the manufacturer of your prospective dimming devices.

Recommended dimmers:

Features:

  • Designed to fit any ceiling surface
  • Built for easy installation in drop ceilings (aka t-bar) ceilings with 2 inches or more installation depth
  • Lay-in and suspension mounting options
  • Environmentally friendly and recyclable
  • Low maintenance and long life

Warranty Information

5 Year Manufacturers Warranty

Videos